VTech Spinning Lights Learning Hippo User Manual

10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Donotdroptheunitonhardsurfacesanddonotexposetheunit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working, then please
followthesesteps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of new
batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
CARE & MAINTENANCE / TROUBLESHOOTING
IMPORTANT NOTE:
Creating and developing VTech
®
Preschool Learning products
is accompanied by a responsibility that we at VTech
®
take very
seriously. We make every effort to ensure the accuracy of the
information which forms the value of our products. However, errors
sometimes can occur. It is important for you to know that we stand
behind our products and encourage you to call our Consumer
ServicesDepartmentat1-800-521-2010intheU.S.,or1-877-352-
8697 in Canada with any problems and/or suggestions that you
might have. A service representative will be happy to help you.

VTech Spinning Lights Learning Hippo Specifications

General

Brand	VTech
Model	Spinning Lights Learning Hippo
Category	Toy
Language	English