VTech Spinning Lights Learning Hippo - Getting Started Guide; Battery Installation Guide; Battery Usage Precautions

3
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover at the back
of the unit.
3. Use a coin or screwdriver to loosen
the screw and open the battery cover.
4. Install 2 new “AA” (AM-3/LR6)
batteries into the battery box as
illustrated. (The use of new, alkaline
batteries is recommended for
maximum performance.)
5. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeablebatteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
GETTING STARTED