VTech T1200 - Date and Time

19
DATE AND TIME
If you have subscribed to a Network Calling Number
Display service, the date and time are set automatically
with each incoming call.
If you have not subscribed to a Network Calling Number
Display Service you can set the date and time manually.
Set the date and time manually:
Press MENU when the phone is not in use. The
screen displays DATE/TIME and USE # FOR AM/PM
alternatively.
0-9
to skip to set the day.
0-9
to skip to set the hour.
0-9
to skip to set the minute.
0-9
Press #AM or PM.
Press SELECT to save your setting.
1.
2.
3.
4.
5.
6.
7.