15
5. Place the digger on the SmartPoint
®
crane tower lift, and move up and down
the crane tower.
6. Place the digger in the SmartPoint
®
control platform.
7. Insert the shape sorter pieces into the
correct locations on the crane tower.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
CARE & MAINTENANCE
To Next Page
Loading...
