4
GETTING STARTED
BATTERY INSTALLATION
Owl Projector
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a screwdriver to loosen the screw.
3. Install 4 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Remote Control
1. Locate the battery cover on the back of the
Remote Control. Use a screwdriver to
loosen the screw.
2. Install 2 new AAA (LR03/AM-4) batteries
following the diagram inside the battery box.
3. Replace the battery cover and tighten the
screw to secure.
506500 US IMrev.indd 4 03/10/2017 17:56:51
To Next Page
Loading...
