VTech V.Smile Jammin Gym Class User Manual

6
GETTING STARTED
CONNECTING TO A VCR
If there is no video IN and audio IN terminal on your TV set, you can
connect V.SMILE™ to a VCR.
- Connect the yellow plug on the V.SMILE™ cable to
the yellow video input terminal on your VCR.
- Connect the white and red plugs on the
V.SMILE™
cable to the white and red audio input terminals on
your VCR.
TO BEGIN PLAY
• Make sure the V.SMILE™ unit is turned OFF and the V.SMILE Jammin’
Gym Class ™ connection cable jack is plugged into the PLAYER 1 slot
located on the front panel of your V.SMILE™.
• Insert the bundled Smartridge™ into the Smartridge™ slot on the front
of the V.SMILE™. The Smartridge™ should lock into place. Please use
care when removing the Smartridge™ from the slot.
• Turn on the TV.
• Set your TV input mode to accept input from the port to which V.SMILE™
is connected. In many cases this will involve setting the TV to “ video”
mode; however, since all TVs vary, please refer to your TV or VCR manual
for further details.
• Turn the V.SMILE™ TV Learning System on by pressing the ON
Button.
• Enjoy your game!

VTech V.Smile Jammin Gym Class Specifications

General

Brand	VTech
Model	V.Smile Jammin Gym Class
Category	Toy
Language	English