VTech V.Smile Motion User Manual

9
Using the V.Smile
®
Motion
tm
Wireless Controller
How to Attach the Wrist Strap to the Controller
• Locate the wrist strap attachment on the bottom of the controller. Attach the wrist strap
through the hole. (Figure 1)
• Place your hand through the wrist strap, so that the strap fits comfortably on your wrist.
Hold the controller firmly in your hands while playing. (Figure 2)
Connecting to the Console - One-Player Mode
• Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move the
switch to PLAYER 1. (Figure 3)
Note: When only one wireless joystick is connected, please set the controller to PLAYER 1.
• Make sure the controller’s Motion Sensor Signal is directly facing the V.Smile
®
Motion
tm
console. (Figure 4)
• When the Motion Sensor Signal Lights and the light on the
V.Smile
®
Motion
tm
console
stop blinking, the connection is complete. (Figure 5)
• Move the PLAYER 1/OFF/PLAYER 2 Switch to OFF when controller is not in use. (Figure 6)
Connecting to the Console - Two-Player Mode
• Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move
the switch to PLAYER 2. (Figure 7)
• Repeat the steps above to be sure the controller is connected for PLAYER 2.
(Figure 2)(Figure 1)
(Figure 7)
(Figure 3) (Figure 6)(Figure 4)
V.Smile
®
Motion
tm
Console
(Figure 5)

VTech V.Smile Motion Specifications

General

Brand	VTech
Model	V.Smile Motion
Category	Toy
Language	English