6
TO BEGIN PLAY / CARE AND MAINTENANCE
CONNECTING V.SMILE™ TO A TELEVISION
Please refer to the V.SMILE user’s manual.
CONNECTING V.SMILE™ to a VCR
Please refer to the V.SMILE user’s manual.
TO BEGIN PLAY
1. Make sure the V.SMILE™ unit is turned OFF and the V.SMILE
SmartBook™ connection cable is plugged into the PLAYER 1 joystick
port on the front of your V.SMILE™ unit.
2. Insert the
SmartBook™ Smartridge™ into the Smartridge™ slot on
the front of the V.SMILE™. The Smartridge™ should lock into place.
(Please use care when removing the Smartridge™ from the slot.)
3. Turn on the TV.
4. Set your TV input mode to accept input from the port to which
V.SMILE™
is connected. In many cases this will involve setting the TV to “video”
mode; however, since all TVs vary, please refer to your TV or VCR
manual for further details.
5. Place the
SmartBook™ into the open unit. The spine of the book
should sit in the open slot in the middle of the SmartBook™.
6. Turn the
V.SMILE™ unit on by pressing the ON Button.
7. Use the Smart Pen to click the icon on the book and enjoy your
game. (About the game play please refer to the SmartBook User’s
manual.)
Note : Always use the attached Smart Pen for interacting with the touch-
sensitive pad. Never use a regular pen on your SmartBook
pages!
CARE AND MAINTENANCE
1. Keep your V.SMILE SmartBook™ clean by wiping it with slightly damp
cloth. Never use solvents or abrasives.
2. Keep it out of direct sunlight and away from direct sources of heat.
3. Remove the batteries when not using it for an extended period of time.
4. Always keep the
V.SMILE SmartBook™ away from water.
5. Avoid dropping it. Never try to dismantle it.
To Next Page
Loading...
Need help?
General