6
Getting started
Power up the headset charger
1. Plug the small end of the
headset charger power adapter
at the back of the headset
charger.
2. Plug the large end into an
electrical outlet not controlled by
a wall switch.
Charge the headset battery
Hang the headset onto the magnetic charging mount.
The magnet holds the headset in place.
• The
light will turn:
- steady red when the headset
battery is low while charging;
- steady purple when the battery
is well charged; and
- steady blue when the battery
is fully charged.
NOTE:
• For optimal performance, charge the headset battery for at least 30 minutes
before use. The battery is fully charged after 2 hours of continuous charging.
When the headset is not in use, recharge by hanging it onto the headset charger.
To Next Page
Loading...
Need help?
General
