VTech VM5254 - Page 10

10
11
Parent unit icons
Alert settings
• Turn on/off Low battery alert tone.
• Turn on/off Link lost alert tone.
• Turn on/off Confirmation alert tone.
Temperature
/
• Turn on/off temperature alert tone.
• Set the parent unit to beep whenever the room temperature
detected by the baby unit falls outside of the set temperature
range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
o
F) or Celsius (
o
C)
Sound activation - screen and audio
/
Turn on/off sound activation
• Set sound activation on or off.
• When it is on while the parent unit screen stays off to save power,
once a sound is detected, the parent unit screen automatically
turns on. The parent unit will then turn off again after 50 seconds
of no sound detection.
NOTESNOTE
Note
• When the parent unit screen is off and it receives alerts, for
example, link lost between parent unit and baby unit, or battery
is low, the parent unit screen and speaker will turn on for 10
seconds.
VOX (Voice Activated Alert) Sensitivity
• You can set VOX sensitivity level to activate the parent unit screen
when the baby unit detects sounds that exceed certain levels. See
Sound sensitivity and sound activation.
Main
menu
Sub-menu
Brightness
• Adjust the parent unit’s LCD screen brightness.
Camera settings
Baby unit speaker volume
• Adjust the baby unit’s speaker volume.
Lullaby
/
Play/Stop lullaby
• Select one of the soothing sounds, or white noise.
• Select one of the five melodies.
• Play all melodies.
• Set timer to stop playing the selected melody or soothing sound.
Main menu icons
Night light
/
Turn on/off night light
4
5
6
7
• Select one of the 7 night light colors.
• Select for the night light to cycle through all 7 colors automatically.
• Set the timer to turn the night light off.
• Set the night light to turn on automatically when the baby unit
detects sound. It will turn off after 15 minutes of no sound
detection. You can set VOX sensitivity level to detect sounds
that only exceed certain levels. See Sound sensitivity and sound
activation.
A
/
• Turn on/off the adaptive night light feature. When this feature is
on, the baby unit detects the ambient light. If the room is bright,
the night light adjusts itself to be brighter; if the room is dim, the
night light adjusts itself to be dimmer.