Remote voice control
If you have connected a cell phone to the VS113/VS113-2/VS113-2S/VS113-3/VS113-3S/VS113-4/VS113-
4S/VS113-5/VS113-5S telephone system, you can activate the voice-controlled application (voice app) of the cell
phone, such as Siri®, Google NowTM or S Voice®, using your handset or telephone base.
The remote voice control feature works with:
Before using the remote voice control feature, make sure you checked the following:
Your cell phone is paired and connected to your telephone system via Bluetooth.
No Bluetooth applications are running in the background of your cell phone.
Keep your cell phone within 15 feet of the telephone base.
Do not lock up your cell phone’s screen or set passcode for activating the voice app.
Make sure you have turned on or logged in to the applications on your cell phone that you will be sending your
voice commands, such as GPS, e-mail and social networking accounts.
Your cell phone’s data or Wi-Fi signal is in full strength and your cell phone can connect to the Internet.
Try to activate the voice app on your cell phone to ensure it is in place.
Activate remote voice control
1. Press VOICE on the handset or VOICE/MUTE on the telephone base.
• If you have connected two cell phones to the telephone, the telephone shows Select a device:. Press ▼ CID
or ▲ to highlight the desired device, then press MENU/SELECT.
• If the activation fails, the telephone displays Not available.
2. When the telephone base or handset plays the confirmation tone as forwarded by the cell phone’s voice app,
start speaking toward the telephone base or handset, and then wait for feedback. Make reply to the voice app’s
feedback, if necessary.
• You can press on the handset to turn off the speakerphone and listen to the feedback through the
handset earpiece.
3. To end the current remote voice control session, press CANCEL on the telephone base or handset. You can
restart by following Steps 1-2 mentioned above.
NOTES
To Next Page
Loading...
