VTech VS 113 - Configure | Settings

Delete your announcement
Using the handset:
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to scroll to Answering sys, and then press
MENU/SELECT to select.
3. Press MENU/SELECT again to choose Announcement.
4. The screen displays Play [2] Del [3] Rec [7] and it announces, “To play, press 2. To record, press 7.” Press 3 to
delete your recorded announcement.
• The screen displays Annc deleted.
• You hear a confirmation tone.
NOTE
After you deleted your own recorded announcement, the answering system answers calls with the default
announcement.
Using the telephone base:
1. Press MENU/SELECT when the phone is not in use.
2. Press MENU/SELECT again to select Answering sys.
3. Press MENU/SELECT again to choose Announcement.
4. Press ▼ CID or ▲ to scroll to Reset annc, then press MENU/SELECT. The screen shows Reset to default
annc?.
5. Press MENU/SELECT again. The screen shows Annc. reset to default.
When your announcement is reset, the system answers calls with the default announcement, as described above.
You cannot delete the default announcement.
Configure | Settings
Set languages
The LCD language is preset to English. You can select English, French or Spanish to be used in all screen
displays.
1. Press MENU/SELECT in idle mode.
2. Press ▼ CID or ▲ to highlight Settings, then press MENU/SELECT.
3. Press MENU/SELECT to select LCD language.
4. Press ▼ CID or ▲ to choose English, Français or Español, and then press MENU/SELECT. NOTE
• If you accidentally change the LCD language to French or Spanish, you can reset it to English easily by
pressing MENU/SELECT then entering:- 364
Set voice language NOTE