This feature is exclusive for Canada version.
The voice prompt language is preset to English. You can select English or French to be used for the voice
prompts in your answering system.
1. Press MENU/SELECT in idle mode.
2. Press ▼ CID or ▲ to highlight Settings, then press MENU/SELECT.
3. Press ▼ CID or ▲ to highlight Voice language, then press MENU/SELECT.
4. Press ▼ CID or ▲ to choose English or Français, and then press MENU/SELECT.
Set date and time NOTE
Make sure you set the date and time including the year correctly; otherwise the answering system does not
announce the correct day of the week for your recorded messages time stamp.
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to choose Set date/time, and then press MENU/SELECT to select.
3. Use the dialing keys (0-9) to enter the month (MM), date (DD) and year (YY). Then, press MENU/SELECT to
move on to set the time.
4. Use the dialing keys (0-9) to enter the hour (HH) and minute (MM). Then, press ▼ CID or ▲ to choose AM or
PM.
5. Press MENU/SELECT to save.
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow
the steps, as mentioned below, to turn the CID time sync feature on or off. The default setting is On.
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to scroll to Settings, and then press MENU/SELECT.
3. Press ▼ CID or ▲ to scroll to CID time sync, and then press MENU/SELECT.
4. Press ▼ CID or ▲ to highlight On or Off, then press MENU/SELECT to save. There is a confirmation tone and
the screen returns to the previous menu.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to look at the display. When you have
an incoming call, the handset and/or base speaks “Call from…” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone number up to the last 11 digits will be
announced. If the caller’s phone number is also private or unknown, no information will be announced.
To turn on or off the caller ID announce feature:
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to scroll to Caller ID annc, and then press MENU/SELECT to select.
3. Press ▼ CID or ▲ to highlight On or Off, and then press MENU/SELECT.
NOTES
To Next Page
Loading...
