3. Press MENU/SELECT to choose Review.
4. Press ▼ CID or ▲ to browse through the allow list entries.
Save a caller ID log entry to allow list
1. Search for the desired caller ID log entry (See Review the caller ID log).
2. When the desired entry appears, press MENU/SELECT.
3. Press ▼ CID or ▲ to highlight To Allow list on the handset, or Allow list on the telephone base, and then press
MENU/SELECT. The screen displays Enter number.
4. Use the dialing keys to edit the number, if necessary.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a digit.
• Press and hold VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all
digits.
• Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P appears).
5. Press MENU/SELECT. The handset displays Enter name.
6. Use the dialing keys to edit the name.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character.
• Press and hold VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all
characters.
• Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to confirm. You hear a confirmation tone.
Edit an allow list entry
1. Search for the desired entry in the block list (see Review allow list).
2. When the desired entry displays, press MENU/SELECT. The screen displays Enter number along with the
phone number to be edited. If you only want to edit the name, skip to Step 4.
3. To edit the number:
• Use the dialing keys to enter digits.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a digit.
• Press and hold VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all
digits.
• Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P appears).
4. Press MENU/SELECT to move on to the name. The screen shows Enter name along with the name to be
edited.
5. To edit the name:
• Use the dialing keys to enter characters.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character.
To Next Page
Loading...
