VTech VS 113 - Page 73

3. Press ▼ CID or ▲ to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays Enter name, use the dialing keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired character appears. The first character of every word is capitalized.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character.
• Press and hold
VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all characters.
• Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT to store your star name entry. The display shows Name repeated if the name is already
in the star name list. You cannot save the same name twice.
Review star name list
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▲ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▲ to scroll to Star name list, then press MENU/SELECT.
3. Press MENU/SELECT to choose Review.
4. Press ▼ CID or ▲ to browse through the star name entries.
Save a caller ID log entry to star name list
1. Search for the desired caller ID log entry (See Review the caller ID log).
2. When the desired entry appears, press MENU/SELECT.
3. Press ▼ CID or ▲ to highlight To Star name on the handset, or Star name list on the telephone base, and then
press MENU/SELECT.
4. The handset displays Star this name?.
5. Press MENU/SELECT to confirm. You hear a confirmation tone.
Edit a star name entry
1. Search for the desired entry in the star name list (see Review star name list).
2. When the desired entry displays, press MENU/SELECT. The screen shows Enter name along with the name to
be edited.
3. To edit the name:
• Use the dialing keys to enter characters.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a character.
• Press and hold VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all
characters. •