You can use these announcements, or record your own name to replace “this number” in the announcements.
Please refer to Record your name for all screening announcements.
NOTES
For details of Smart call blocker’s profile setting, see Set profile.
Play your current announcement of screening with caller name
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▲ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▲ to scroll to Screening annc, then press MENU/SELECT.
3. Press ▼ CID or ▲ to scroll to Play annc, then press MENU/SELECT.
4. Press MENU/SELECT again to select w/ Caller name.
Play your current announcement of screening without caller name
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▲ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▲ to scroll to Screening annc, then press
MENU/SELECT.
3. Press ▼ CID or ▲ to scroll to Play annc, then press MENU/SELECT.
4. Press ▼ CID or ▲ to scroll to w/o Caller name, then press MENU/SELECT.
Record your name for all screening announcements
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▲ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▲ to scroll to Screening annc, then press MENU/SELECT.
3. Press MENU/SELECT to select Rec your name. The system announces, “Record after the tone. Press 5 when
you are done.”
4. Speak towards the handset to record your name. Press 5 to end recording.
To listen to the announcement with your recorded name again, scroll to Play annc and press MENU/SELECT.
Reset all your screening announcements