How to troubleshoot no output power on my VTOMAN JUMP1000?
If your VTOMAN Power Supply shows no output power, first ensure your device is properly connected to the power station. Then, verify that the output switch is turned on. Finally, check the battery level; if it's low, recharge the power station fully before attempting to use it.
What to do if my VTOMAN JUMP1000 Power Supply is not charging?
If your VTOMAN Power Supply isn't charging, ensure the charger is securely connected to both the power station and the wall outlet. If the connections are good but the charger indicator remains off, it may indicate a broken charger.
Why does the output break down during use on my VTOMAN JUMP1000?
If the output of your VTOMAN Power Supply breaks down during use, it might be because your device's operating power is too low, causing the power supply to turn off automatically. Turn the power back on to resume operation.
Details the physical components and ports of the power station.
Explains the display screen and its indicators like battery percentage and time.
Instructions for turning the power station and its outputs on and off.
Describes various methods for recharging the power station, including wall and solar.
Step-by-step guide on how to use the power station to jump-start a car.
Critical warnings about immediate severe harm or death from misuse.
Warnings about potential serious injury or death due to improper use or conditions.
Precautions to avoid minor injuries or property damage from incorrect operation.
Limits company liability for damages from misuse, accidents, or non-compliance.
General| Brand | VTOMAN |
|---|---|
| Model | JUMP1000 |
| Category | Power Supply |
| Language | English |
To Next Page
