Why is my VTOMAN Jump 600 not providing any output power?
If your VTOMAN Power Supply isn't providing output power, first ensure your device is properly connected to the power station. Then, verify that the output switch is turned on. Finally, check the battery level and recharge the power station fully if it's low.
Diagram illustrating the layout and labels of various ports and indicators on the power station.
Explanation of the LCD screen elements, including battery percentage, input/output power, and status indicators.
Instructions on how to power the device on and off, and control its various output functions.
Details on different methods for recharging the power station and estimated recharge times.
Step-by-step guide on how to use the power station to jump-start a vehicle's battery.
General| Battery Capacity | 600Wh |
|---|---|
| Battery Type | Lithium-ion |
| Weight | 13.2 lbs (6 kg) |
| Dimensions | 11.7 x 7.5 x 7.9 inches (29.7 x 19 x 20 cm) |
| Warranty | 24 months |
| AC Output | 600W (1200W Surge) |
| USB-C Output | 60W |
| DC Output | 12V/10A |
| AC Charging Time | 6-7 hours |
To Next Page
