How to troubleshoot no output power on my VTOMAN JUMP2200?
If your VTOMAN Power Supply shows no output power, first ensure your device is properly connected to the power station. Then, verify that the output switch is turned on. Finally, check the battery level; if it's low, recharge the power station fully before attempting to use it.
What to do if my VTOMAN JUMP2200 is not charging?
If your VTOMAN Power Supply isn't charging, ensure the charger is securely connected to both the power station and the wall outlet. If the connections are good but the charger indicator remains off, it may indicate a broken charger.
Why does the output break down during use on my VTOMAN Power Supply?
If the output of your VTOMAN Power Supply breaks down during use, it might be because your device's operating power is too low, causing the power supply to turn off automatically. Turn the power back on to resume operation.
Instructions for turning the power station on/off and controlling AC, DC, USB outputs.
Step-by-step guide to jump-starting a 12V vehicle battery using the power station.
Essential warnings about severe injury or death from improper handling, disassembly, or exposure.
Warnings regarding use in unsuitable environments, damage, and keeping away from children/pets.
Cautions for preventing injuries and property damage, including handling spills and vibrations.
General| Battery Capacity | 2200Wh |
|---|---|
| Capacity | 2200Wh |
| AC Outlets | 4 |
| USB Ports | 4 |
| USB-C Output | 100W |
| USB-A Output | 18W |
| DC Output | 12V/10A |
| Car Output | 12V/10A |
| Battery Type | Lithium Iron Phosphate |
| Solar Input | 600W |
| AC Output | 2200W (Surge 4400W) |
| Weight | 15.5 kg |
| Dimensions | 38 x 24 x 27 cm |
| Output Power | 2200W (Surge 4400W) |
| Cycle Life | 3100 Cycles to 80% |
To Next Page
