4.3Jump Start Your Vehicle
UMP1000/JUMP1500X/JUMP1800 are designed for jump starting 12V
vehicle batteries，Start current: 500A Peak current: 2000A.
Step 1: Fully plug the blue connector of the clamp cable into the jump
starter socket, and make sure the Indicator on the clamp cable is off.
Step 2: Connect Red Clamp to the negative(+) battery terminal and
Black Clamp to the negative(-) battery terminal.
Car Charging
1.Cigarette Lighter Plug
2.Car Charger
Recharge Time
6
JUMP1000 JUMP1500X JUMP1800 Extra Battery
Wall Charger 7-8 Hours 4-5 Hours 8-9 Hours 8-9 Hours
Car Charger 8-9 Hours 5-6 Hours 9-10 Hours 9-10 Hours
To Next Page
