Need help?Do you have a question about the Vu+ Solo2 and is the answer not in the manual?
General| Signal source | Satellite |
|---|---|
| Digital signal format system | DVB-S, DVB-S2 |
| Personal Video Recorder (PVR) included | Yes |
| Tuner type | Digital |
| Product color | Black |
| Number of tuners | 1 tuner(s) |
| Audio output channels | - channels |
| Operating system installed | Linux |
| Electronic Program Guide (EPG) | - |
| Processor frequency | 1300 MHz |
| Flash memory | 256 MB |
| Internal memory | 1024 MB |
| HDD size | 2.5 \ |
| Built-in HDD | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 3 |
| SmartCard slots quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Ethernet LAN data rates | 1000 Mbit/s |
| Display type | VFD |
The included guide to help you set up the device.
Component for powering the device.
Device remote control for operating the receiver.
Cable for connecting the device to a TV for audio/video.
Cable used for connecting storage devices like HDDs.
Shows current menu and program information.
Connects to USB memory sticks or external HDDs.
Slot for Conditional Access Module.
Slots for inserting smartcards.
Connects satellite signal cables.
Outputs analog video and audio signals.
Connects to TV using HDMI for audio/video.
Connects to a digital audio system.
For network connectivity.
Universal Serial Bus port for external devices.
SCART connector for TV connection.
Input for the power adapter.
Turns the set-top box on or off.
Navigates menus and channel lists.
Adjusts audio volume and changes channels.
Accesses the Electronic Program Guide.
Used for inputting numbers and special functions.
Displays subtitle or teletext information.
Connect satellite signal cables to LNB 1 & 2 for optimal performance.
Use the included HDMI cable to connect the device to your TV's HDMI input.
Connect the power cord and adapter to the device's power input.
Details nominal and maximum voltage and frequency ranges for AC power.
Select the user interface language using the remote control's navigation keys.
Start the wizard to configure satellite connection settings for your device.
Choose connection mode: Simple, Loop through, Equal to, or Advanced.
Set up automatic or manual channel scanning.
Choose to install default satellite service lists.
Enable or disable parental controls and set a PIN.
Steps to find the full user manual via the Opera Web Browser.
To Next Page
