VXi Reveal Pro
TM
Office User Guide
PAGE 11
CONNECT TO YOUR DESK PHONE (continued)
Desk Phone with EHS (sold separately)
1. Connect and configure as described above.
2. Snap the EHS to the base unit.
3. Connect the EHS cable to the EHS port on the base station. Refer to the EHS setup instructions for
further installation details.
Desk Phone with L50 Lifter (sold separately)
1. Connect the desk phone connection cable to the handset port of the phone.
2. Check Configuration and Make a Test Call (see above).
3. Attach the L50 Lifter to your phone. Refer to the L50 user’s guide for lifter setup and adjustment details.
Position Base
To reduce the possibility of noise and interference problems, position the base at least 6 inches away from
your desk phone and at least 12 inches away from your computer.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
To Next Page
Loading...
Need help?
General
