204001X V300 Quick-Start Guide 122016.docx 12
3. Neckband
a. Position the headset earpiece over the neckband ring and press until it
clicks into place
<<Image of Neckband Attachment>>
b. To wear, position the neckband around the back of the neck and over
both ears. Angle the microphone boom toward the corner of the
mouth.
<<Image of Neckband Wearing and Positioning>>
c. To switch neckband wearing sides, remove the headset from the
neckband, and then remove the ring from the neckband arm. Insert
the ring post into the bottom hole of the other neckband arm until it
clicks into place.
<<Image of Changing Neckband Wearing Side>>
To Next Page
Loading...
