Wacker Neuson 50Z3 User Manual

BA 50Z3/6003 en – Edition 4.3 * * 5003b540.fm 5-59
Maintenance
Check tracks for cracks and cuts ●● Check track tension. Retighten if necessary ●● Check bearing play of tread rollers, track carrier rollers, front idlers ●● Check piston rods for damage ●● Check the threaded fittings of the safety devices (for example cab, etc.) for tightness ●● ●
Check screws for tightness ●● Check pin lock ●● Check line fixtures ●● Check indicator lights for correct function ●● Check cab tilt lock, cables and cable holders for damage and correct function ●● ● Couplings, dirt pile-up on hydraulic system dust caps ●●
Check insulating mats in the engine compartment for damage/condition ●● Ensure grease supply of central lubrication system (option) ●● Check labels and Operator’s Manual for completeness and condition ●●
Adjust the mirrors (option) correctly, clean them and check them for damage and correct function ●● Check all fastening screws on the mirrors (option) and tighten them if necessary ●● Check function of engine cover gas strut ●● Check hydraulic quickhitch for damage ●● Lights and acoustic warning system
8
●●
Check gearing of swivel unit pinion ●● Check Powertilt (option) for damage ●● Check the axial play of the Powertilt (option). (must not be over 0.38 mm/0.015 in) ●● Actuate the Powertilt (option) swivel device in the final position for 1 minute
9
●●
5.22 Maintenance plan (overview) Work description For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
Every 50 s/h
Every 250 s/h
Every 500 s/h
Every 1000 s/h
once a year
Every 1500 s/h
Every 2000 s/h
Customer
Authorized
workshop

Wacker Neuson 50Z3 Specifications

General

Brand	Wacker Neuson
Model	50Z3
Category	Excavators
Language	English