11 Maintenance
40
11.1 Maintenance personnel qualifications
Qualifications for maintenance work
The maintenance work described in this operator's manual may be performed by
any responsible user unless otherwise stated.
Some maintenance work may only be performed by specially trained personnel
or by the service staff of your Wacker Neuson contact — these are specifically
noted.
11.2 Maintenance schedule
Task Daily be-
fore oper-
ation
Every
20 hrs.
Monthly Annually
Visual inspection of all parts
for damage.
Clean the machine.
Ventilation slots.
Air cleaner.
Check the fuel:
Fuel tank fill level.
Fuel tank for leaks.
Lines for leaks.
Check the tool ends and cut-
ting edges – if required,
sharpen, reforge or replace.
Lubricate the machine.
Clean spark plug – change, if
necessary.
Check tool holder for wear –
have it changed, if
necessary. *
* Have these tasks carried out by the service department of your Wacker Neuson con-
tact person.
Have the fuel filter replaced. *
To Next Page
Loading...
Need help?
General
