11 Maintenance
42
Performing preparations
1. Switch off the engine.
2. Lean the machine upright against a solid object and secure it to prevent it
from toppling over.
Wacker Neuson recommends to hang the machine on the truck.
3. Let machine cool off.
Topping up with fuel
1. Remove any dirt around the fuel cap.
2. Slowly unscrew and remove fuel cap.
Note: Slowly unscrew the fuel cap so that any overpressure can slowly escape.
3. Use a clean funnel to replenish fuel.
See chapter Technical data for the fuel specification.
See chapter Technical data for the fuel mixing table.
4. Position the fuel cap and tighten it.
Item Designation
1 Fuel cap
To Next Page
Loading...
