Wacker Neuson BPS1030

Commissioning
7.3 Putting into operation
28
Operator’s Manual | BPS | 5100060589 | 07/2021 | [us]
A
2
B
2. Move choke lever 2 to position A when the engine is cold.
3. Move the choke lever to position B when the engine is warm.
3
A
4. Move the throttle lever 3 into position A.
4
A
5. Move the engine switch4 into positionA.
5
6. Pull the starting handle 5.
ð Pull the starting handle slightly until resistance is felt, then pull it
strongly. Slowly return the starting handle.