EasyManuals Logo

Wacker Neuson BS 60-4 User Manual

Wacker Neuson BS 60-4
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
BS 50-4 Operation
wc_tx000308gb.fm 25
Note: First time use, engines recently serviced, run out of fuel or not
used for long periods of time may need the rope to be pulled more
times to move fuel to the carburetor.
5.4.6 Open choke (b2) on the carburetor as the engine warms up.
Note: A cold engine should be allowed to warm up at the idle position
(c2) for approximately one (1) minute. Failure to open the choke after
the engine attempts to start may cause flooding.
CAUTION: Always open choke (b2) with throttle in idle position (c2).
Opening choke with throttle not in idle position (c2) may result in
rammer motion.
5.5 To Stop
See Graphic: wc_gr001454
5.5.1 Place throttle in the idle position (c2).
5.5.2 Turn engine switch to "OFF" (d).
5.5.3 Close fuel valve (e).
c1
c2
c3
c4
b1
b2
d
a
e

Other manuals for Wacker Neuson BS 60-4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BS 60-4 and is the answer not in the manual?

Wacker Neuson BS 60-4 Specifications

General IconGeneral
Engine ManufacturerHonda
Displacement163 cm³
Operating Weight66 kg
Percussion Rate700 blows/min
EngineHonda GX 160
Stroke60 mm
Engine Type4-stroke
Fuel Tank Capacity3.0 liters

Related product manuals