EasyManuals Logo

Wacker Neuson BS 60-4 User Manual

Wacker Neuson BS 60-4
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
BS 50-4 Maintenance
wc_tx000309gb.fm 33
6.5 Shoe Hardware
See Graphic: wc_gr000048
On new machines, or after replacing shoe, check and tighten shoe
hardware (a) after the first 5 hours of operation. Inspect hardware
every week thereafter.
Torque hardware as specified.
6.6 Long-Term Storage
6.6.1 Drain fuel from tank.
6.6.2 Start engine and run until remaining fuel is used.
6.6.3 Remove spark plug. Pour approximately 30 ml (1 oz.) of clean SAE
10W30 engine oil into cylinder through spark plug opening.
6.6.4 Pull starter rope slowly to distribute oil in engine.
6.6.5 Re-install spark plug.
w c _ g r 0 0 0 0 4 8
a
8 6 N m
( 6 3 f t . l b s . )

Other manuals for Wacker Neuson BS 60-4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BS 60-4 and is the answer not in the manual?

Wacker Neuson BS 60-4 Specifications

General IconGeneral
Engine ManufacturerHonda
Displacement163 cm³
Operating Weight66 kg
Percussion Rate700 blows/min
EngineHonda GX 160
Stroke60 mm
Engine Type4-stroke
Fuel Tank Capacity3.0 liters

Related product manuals