Wacker Neuson BS 70-2i

Maintenance BS 60-2i, BS 70-2i
34 wc_tx000924gb.fm
6.4 Shoe Hardware
See Graphic: wc_gr005385
On new machines, or after replacing shoe, check and tighten shoe
hardware after the first 5 hours of operation. Inspect hardware every
week thereafter.
Torque hardware as specified.
Cast Iron Shoe Plastic Shoe
Torque Nm Ft.lbs.
T1 86 63
T3 19 14
T5 78.7 58
T1
T1
T5
T3
T3
T5
wc_gr005385