Table of Contents
Rammer
wc_bo5200016051_08_FM10T
15
Foreword 3
EC Declaration of Conformity 7
1 Safety Information 17
1.1 Signal Words Used in this Manual ..................................................... 17
1.2 Machine Description and Intended Use ............................................. 18
1.3 Safety Guidelines for Operating the Machine ..................................... 19
1.4 Safety Guidelines for Lifting and Transporting the Machine ............... 20
1.5 Service Safety .................................................................................... 21
1.6 Operator Safety while Using Internal Combustion Engines ............... 23
2 Labels 24
2.1 Label Locations .................................................................................. 24
2.2 Label Meanings .................................................................................. 25
3 Lifting and Transporting 30
3.1 Lifting the Rammer ............................................................................. 30
3.2 Transporting the Rammer .................................................................. 31
4 Operation 34
4.1 Preparing the Machine for First Use ................................................... 34
4.2 Recommended Fuel ........................................................................... 35
4.3 Refueling the Machine ........................................................................ 37
4.4 Filling the Oil Tank .............................................................................. 38
4.5 Purging the Oil Lines .......................................................................... 39
4.6 Position of the Operator ..................................................................... 41
4.7 Before Starting ................................................................................... 41
4.8 Starting, Operating, and Stopping the Machine ................................. 42
4.9 Emergency Shutdown Procedure ....................................................... 44
4.10 Selecting and Adjusting the Ramming Stroke—BS 65-V ................... 45
4.11 Optional Equipment ............................................................................ 48
5 Maintenance 49
5.1 Maintaining the Emission Control System .......................................... 49
5.2 Periodic Maintenance Schedule ......................................................... 50
5.3 Servicing the Air Cleaner .................................................................... 51
To Next Page
Loading...
Need help?
General
