DPU 130 3 Using the configuration menu
Machine configuration manual 15
Exiting the configuration menu and saving your settings
1. Press the ON/OFF switch on the machine until the following text appears on
the display screen:
After approx. 2 seconds the changed settings are saved and the configuration
menu is exited.
Note:
If you are uncertain and wish to check the changed settings again, before the
2 seconds have elapsed, press the ON/OFF switch on the machine to run
through the configuration menu again.
2. Deactivate the machine.
Note:
For the changed settings to become effective, the machine must be deactivated
once and then reactivated.
Setup
Exit
To Next Page
Loading...
