Wacker Neuson DPU Series User Manual

7 Transport
100_0202_tr_0009.fm 26
Lift machine
1. Place the central lifting point in the vertical position.
2. To lift the motor, hang suitable tackle at the central lifting point.
3. Carefully load machine into or onto a stable means of transport.
4. After loading the machine, lash down the machine to prevent it from rolling off, slipping,
or tipping over. Attach tie-down lugs to the designated lashing points.
NOTE
Establish a flagman for a secure lifting process.
Item Designation Item Designation
1 Central lifting point (attachment point) 2 Tie-down lugs
1
2

Wacker Neuson DPU Series Specifications

General

Model	DPU Series
Type	Reversible Plate Compactor
Frequency	90 Hz
Travel Speed	Varies by model and surface conditions
Compaction Performance	Varies by model