EasyManua.ls Logo

Wacker Neuson DPU 4045H User Manual

Wacker Neuson DPU 4045H
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.wackergroup.com
Operator´s Manual
Vibratory plate
DPU 4045H
0109984en 003
04.2008
Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson DPU 4045H and is the answer not in the manual?

Wacker Neuson DPU 4045H Specifications

General IconGeneral
BrandWacker Neuson
ModelDPU 4045H
CategoryPower Tool
LanguageEnglish

Summary

Foreword

Safety Instruction

General Instructions

Defines operator eligibility and general machine usage rules.

Operation Safety

Outlines safe operational procedures and precautions during use.

Safety Checks

Details mandatory checks before and during operation for safety.

Maintenance Guidelines

General guidelines and rules for performing maintenance tasks.

Transport Procedures

Specifies procedures and safety measures for transporting the machine.

Maintenance Checks Schedule

Outlines the schedule and requirements for periodic machine checks.

Technical Data

Description

Applications

Explains the intended uses and application range of the machine.

Dimensions

Lists the physical dimensions of the vibratory plate.

Maximum Admissible Inclination

Specifies the maximum safe operating angles for the machine.

Description of Function

Details how the various components and systems of the machine operate.

Transport and Compaction

Transport to Work Site

Provides instructions and conditions for safely transporting the machine.

Recommendations on Compaction

Offers advice and best practices for effective soil compaction.

Operation

Starting the Engine

Step-by-step guide on how to start the machine's engine.

Mechanical Oil Pressure Control

Explains how to activate and check the mechanical oil pressure control system.

Forward and Reverse Motion

Details how to control the machine's direction of travel and speed.

Switching Off

Provides instructions on the correct procedure for shutting down the machine.

Compaction Without Extension Plates

Specific steps for operating the machine when extension plates are not used.

Starting in Low Temperatures

Special instructions for starting the engine in cold weather conditions.

Maintenance

Maintenance Schedule

Outlines a schedule for routine maintenance tasks and their intervals.

Engine Oil

Instructions for checking and changing the engine oil.

Hydraulic Control

Procedures for checking oil levels and venting the hydraulic system.

Exciter

Details on checking and changing the oil in the exciter unit.

Exciter V-belt

Instructions for inspecting and replacing the exciter V-belt.

Faults and Remedies

Forward Speed Too Low

Identifies causes and remedies for low forward speed.

Reverse Speed Too Low

Identifies causes and remedies for low reverse speed.

No Reverse Motion

Identifies causes and remedies for the machine not moving in reverse.

Loss of Hydraulic Oil

Identifies causes and remedies for hydraulic oil leaks.

Engine Does Not Start

Identifies causes and remedies for the engine failing to start.

Labels and Notices

EC Declaration of Conformity

Certificate of Quality Management

Related product manuals