7-4 BA D24 en/us* 1.0 * D24_1_0_700.fm
7 Maintenance
Engine and hydraulic system --
Traveling drive, axles and transfer
gearbox
--
Braking system --
Cooling systems, heating, and hoses (visual check) --
Visual check
Check for correct function, deformations, damage, surface cracks, wear and corrosion. Page
Check the exhaust system for damage --
Check the insulating mats in the engine compartment for damage --
Check the cabin and protective structures for damage (for example the rollbar) --
Check the piston rods of the cylinders for damage --
Check the seat belt for damage 7-16
Check function of engine cover gas strut --
Check the lifting eyes --
1. Interval according to indicating instrument
2. Check the threaded fittings and corresponding components/assemblies visually or manually (without using tools) for tightness. Replace the threaded fitting in
case of irregularities. Pay attention to adhesion as you do so.
Daily maintenance (operator)
To Next Page
Loading...