BA D24 en/us* 1.0 * D24_1_0_700.fm 7-5
Maintenance 7
Other maintenance intervals (Wacker Neuson service center):
• Every 500 operating hours or annually
• Every 1000 operating hours
• Every 1500 operating hours
• Every 2000 operating hours
• Every 3000 operating hours
Maintenance work with the note authorized service center must only be
performed by the trained and qualified personnel of an authorized service
center.
Weekly maintenance (every 50 operating hours) (operator) Page
All steps for previous maintenance intervals --
Check the axle mounting for tightness (visual check) --
Check the wheel nuts for tightness (visual check) --
Check accesses and exits for dirt --
Replace the air filter
1
1. Air filter replacement according to the indicator light, every 1000 o/h or once a year at the latest. (Replace after 50 o/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminum mills, chemical plants and other nonferrous-metal plants, independently of the indicator
light; contact an authorized service center.)
7-27
Only once after the first 50 operating hours (Wacker Neuson service center) Page
Replace the oil filter of the machine-travel hydraulics --
Replace the oil filter of the operating hydraulics --
Replace the gearbox oil in the traveling drive, axles and transfer gearbox --
Check V-belt condition and tension --
Check the threaded fittings for tightness --
Check labels and Operator’s Manual for completeness and condition --
Check the pressure of the primary pressure limiting valves --
Retighten the wheel nuts --
Reset the maintenance meter --
All steps for maintenance once a day and once a week --
To Next Page
Loading...
Need help?
General
