BA D24 en/us* 1.0 * D24_1_0_700.fm 7-3
Maintenance 7
Maintenance plan
Daily maintenance (operator)
Symbol
Inspection work
(Check the following engine/machine fluids. Check the oil levels after a test
run and add oil if necessary.)
Page
Check the engine/machine fluids (engine oil, engine coolant, hydraulic oil,
brake fluid)
7-23, 7-25,
7-29, 7-33
Check the radiator for dirt, clean it if necessary 7-26
Drain water separator (prefilter) and fuel filter
1
7-21
Check the tires (damage, inflation pressure, tread depth) 7-34
Check the engine air intake 7-27
Check the pin locks --
Check line fixtures --
Check the indicator lights and acoustic warning devices 4-24
Check the service and parking brake function 5-4
Check the screw connections of the protective structures (for example the
cab, rollbar) for tightness
2
7-16
Clean the lights/light system, signaling systems --
Option
Adjust the mirrors and camera system correctly, clean and check them for
damage, check the fastening screws and tighten them if necessary
4-11
Check the condenser for dirt, clean it if necessary 7-26
Leakage check
Check for tightness, leaks and chafing: pipes, flexible lines and screw connections of the fol-
lowing assemblies and components. Have them repaired if necessary.
To Next Page
Loading...
Need help?
General
