6-4 BA D18 us* 1.1 * D18t600.fm
6 Transportation
Disabling the hydraulic parking brake
Burn hazard due to hot surfaces!
Can cause serious burns or death.
► Stop the engine and let it cool down.
► Wear protective equipment.
Higher towing speeds and longer towing distances may cause severe
damage to the machine.
► Tow the machine away only from the immediate danger zone.
► Do not tow the machine farther than 20 meters (66 ft).
► Wear protective equipment.
1. Secure the machine with chocks to prevent it from rolling.
2. Secure the machine at the tie-down points with slings of sufficient
dimensions.
3. Loosen unlocking screws A on the front axle.
4. Remove shims B on either side
5. Screw in the unlocking screw A alternately as far as they will go.
➥ The hydraulic parking brake is disabled.
6. Perform towing.
Once towing is over, have repair work performed by an authorized service
center.
Towing the machine on public roads
Do not tow other vehicles with the dumper, nor must the dumper be towed
with another vehicle.
Fig. 160: Removing shims
B
To Next Page
Loading...
Need help?
General
