Wacker Neuson DW90 User Manual

6-6 BA D18 us* 1.1 * D18t600.fm
6 Transportation
6. Start the engine.
7. Lower the skip.
8. Carefully travel the machine backward onto the middle of the transport
vehicle.
9. Move the machine to transport position.
10.Apply the parking brake.
11.Stop the engine.
12.Remove the starting key and carry it with you.
13.Leave the control stand. If the machine is equipped with a cabin
(option), close and lock the door, windows and all covers.
Center-pivot prop
WARNING
Crushing hazard due to machine steered via the articulation!
Can cause serious injury or death.
► Install the center-pivot prop before lifting the machine.
The center-pivot prop prevents the machine from being steered.
1. Remove pin B.
2. Rotate center-pivot prop A toward rear chassis C.
3. Insert pin B.
Information
Install the center-pivot prop back onto the front chassis before putting the
machine into operation again.
Fig. 163
Fig. 164
A
B
A
A C
B
C

Wacker Neuson DW90 Specifications

General

Brand	Wacker Neuson
Model	DW90
Category	Excavators
Language	English