Wacker Neuson E13-01 User Manual

BA EZ17 en* 1.1 * ez17b510.fm 5-47
Operation 5
Connecting and disconnecting hydraulic couplings
1. Stop and park the machine. See “Preparing lubrication”.
2. Position the boom straight ahead at the center of the machine.
3. Lower the stabilizer blade to the ground.
4. Turn the starting key to position 1.
5. Move the control lever or the slide switch of the hydraulic circuit in all
directions repeatedly.
6. Remove the starting key and carry it with you.
➥ The grab hose couplings can now be coupled and uncoupled.
Hydraulic connections
Information
Follow the instructions in the Operator’s Manual of the attachment
manufacturer for connecting the hydraulics to the attachment.
Fig. 154
A B C
Connection Stick (left)
A AUX V (option)
B AUX II/AUX III (option)
C AUX I
Fig. 155
C
AB

Wacker Neuson E13-01 Specifications

General

Brand	Wacker Neuson
Model	E13-01
Category	Excavators
Language	English