BA EZ17 en* 1.1 * ez17w700.fm 7-5
Maintenance 7
Check the antifreeze at temperatures below 4 °C (39 °F).
Other maintenance intervals (Wacker Neuson service center):
• Every 500 operating hours or annually
• Every 1000 operating hours
• Every 1500 operating hours
• Every 2,000 hours of operation or every two years
For additional details contact a Wacker Neuson service center.
Maintenance with the note authorized service center must only be
performed by the trained and qualified personnel of an authorized service
center.
Option
Check the load hook, joint rod, lifting eyes 7-48
Check the hydraulic quickhitch (Easy Lock) for damage --
Check the Powertilt for damage --
Weekly maintenance (every 50 operating hours) (user) Page
Lubricate the machine according to the lubrication schedule 7-8
Clean the lights/light system, signaling system, acoustic warning system --
Check V-belt condition and tension 7-38
Option
Actuate Powertilt swivel device in final position for 1 minute
2
--
All steps for previous maintenance intervals --
1. Air filter replacement according to the dirt indicator, every 1000 o/h or once a year at the latest. (Replace after 50 o/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminum mills, chemical plants and other nonferrous-metal plants, independently of the dirt indi-
cator)
2. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
Daily maintenance (user)
Only once after the first 50 operating hours (Wacker Neuson service center)
Engine oil replacement --
Engine oil filter replacement --
Hydraulic oil filter insert replacement --
Drive gearbox oil replacement --
Check V-belt condition and tension --
Check the threaded fittings for tightness --
Check labels and Operator’s Manual for completeness and condition --
Pressure check of primary pressure limiting valves --
All steps for maintenance once a day and once a week 7-4
To Next Page
Loading...
Need help?
General
