7-4 BA EZ17 en* 1.1 * ez17w700.fm
7 Maintenance
7.2 Maintenance overview
Maintenance plan
Daily maintenance (user)
Inspection work
(Check the following fluids and lubricants, check the oil levels after a test run and add oil if nec-
essary)
Page
Check the fluids and lubricants (engine oil, engine coolant, hydraulic oil)
7-33, 7-35,
7-40
Check the radiator and hydraulic oil cooler for dirt, clean them if necessary 7-36
Lubricate the machine according to the lubrication schedule 7-8
Check the dirt indicator on the air filter
1
7-37, 7-37
Check the water separator and fuel filter: drain water if necessary (see sight glass) 7-29, 7-30
Check the track tension and retension the tracks if necessary 7-45, 7-46
Check the engine air intake 7-38
Check pin lock --
Check line fixtures --
Check indicator lights for correct function 4-22
Check the hydraulic couplings for dirt --
Check the threaded fittings of the protective structures (canopy, for example) for tightness --
Option
Adjust the mirrors correctly, clean them and check them for damage, check the fastening
screws and tighten them if necessary
4-8
Leakage check
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings of the follow-
ing assemblies and components. Repair if necessary
Page
Engine and hydraulic system --
Travelling drive --
Cooling systems, heating, and hoses (visual check) --
Option
Hydraulic quickhitch (Easy Lock) and Powertilt (hoses, valve) --
Visual check
Correct function; deformations, damage, surface cracks, wear and corrosion Page
Check the exhaust system for damage --
Check the insulating mats in the engine compartment for damage --
Check the canopy and protective structures for damage (FOPS, for example) --
Check the tracks for damage --
Check the travel gear for damage (for example the track rollers, insert rolling bearings) --
Check the piston rods of the cylinders for damage --
Check the seat belt for damage --
To Next Page
Loading...
Need help?
General
