EasyManua.ls Logo

Wacker Neuson E13-01

Wacker Neuson E13-01
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-20 BA EZ17 en* 1.1 * Safety_01_0.fm
2 Safety
Handling oil, grease and other substances
When handling oil, grease and other chemical substances (for
example the battery acid, coolant), observe the safety data sheets.
Wear appropriate protective equipment (for example protective gloves,
safety glasses).
Be careful when handling hot consumables – burn hazard.
In polluted environment (dust, vapors, smoke, asbestos), work only
with appropriate personal protective equipment (for example with a
breathing mask).
Do not operate the vehicle in radioactively, biologically or chemically
contaminated areas.
Fire hazard
Fuel, lubricants and coolants are flammable.
Do not put the machine into operation if there is a fire hazard.
Do not use flammable detergents.
Keep the area around the exhaust system free of flammable materials.
Due to hot machine parts, maintain a safe distance from easily
flammable material (for example from hay, dry leaves).
- Stop and park the machine only in fire-protected areas.
If the machine is equipped with a fire extinguisher, have it installed in
its specific location.
Keep the machine clean to reduce the fire hazard.
Working near electric supply lines
Before performing any work, the operator must check whether there
are any electric supply lines in the job site.
If there are electric supply lines, only a machine with cabin may be
used (Faraday cage).
Keep a safe distance from existing electric supply lines.
If this is not possible, the operator must take other safety measures (for
example switching off the current) in agreement with the operating
company or owner of the supply lines.
If supply lines are exposed, they must be fastened, supported and
secured accordingly.
If live supply lines are touched nevertheless:
- Do not leave/touch the cabin (Faraday cage)
- If possible, drive the machine out of the danger zone
- Warn others against approaching and touching the machine
- Have the live wire de-energized
- Do not leave the machine until the supply lines that have been
touched or damaged have been safely de-energized

Table of Contents

Related product manuals