5-42 BA E16 en* 1.0 * E16_10_510.fm
5 Operation
Hydraulic Easy Lock quickhitch (option)
• Attend specific training before putting into operation. Training must be
given by authorized technical personnel and must be understood by
the operator.
• For safety reasons, the quickhitch must be operated with two control
elements. This avoids opening the quickhitch unintentionally during
work operation.
• The quick coupler system and the attachment support must be
undamaged and clean.
• For more information, see Easy Lock/Powertilt with Easy Lock
Operator’s Manual.
• Store the Easy Lock/Powertilt with Easy Lock operator's manual
together with the vehicle's operator's manual.
Crushing hazard when picking up attachments!
If an attachment is not locked correctly, it can come off and cause serious
injury or death.
► Do not allow anyone to stay in the danger zone.
► Only use undamaged attachments and quick coupler systems.
► Check pin F must be fully retracted. Otherwise repeat the lock cycle
until check pin F is retracted.
► Before starting any work and after every locking process, press the
attachment to the ground and quickly move it back and forth over just
over the ground a few times to check the secure locking.
► Operate the vehicle only with a safely locked attachment.
Crushing hazard when attachments are removed!
If an attachment is not removed correctly, it can tip over and cause serious
injury or death.
► Do not allow anyone to stay in the danger zone.
► Lower the attachment to level and firm ground ensuring stability.
To Next Page
Loading...
Need help?
General
