OM ET18/20/24 us 1.3 * et18_20_24w700.fm 7-3
7
Check the antifreeze at temperatures below 4 °C (39 °F).
Check the load hook, joint rod, lifting eyes 7-52
Check the hydraulic quickhitch (Easy Lock) for damage --
Check Powertilt for damage --
Weekly maintenance (every 50 service hours) (operator) Page
Lubricate the machine according to the lubrication plan 7-6
Clean the lights/light system, signalling system, acoustic warning system --
Check V-belt condition and tension 7-40, 7-41
Check the fresh-air filter (clean or replace it if necessary)
2
Option
Actuate Powertilt swivel device in final position for 1 minute
3
--
All steps for previous maintenance intervals --
1. Air filter replacement according to the dirt indicator, every 1000 s/h or once a year at the latest. (Replace after 50 s/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminium mills, chemical plants and other nonferrous-metal plants, independently of the dirt indi-
cator)
2. When in extensive use in dusty environment. Replace the filter if it shows signs of cracks, damage or clogging.
3. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
Daily maintenance (operator)
To Next Page
Loading...
Need help?
General
