9-16 OM ET18/20/24 us 1.3 * et18_20_24t900.fm
9
All table values are specified in kg (lbs) under the following conditions:
• Upper carriage not tilted.
• Machine placed on firm, level and horizontal ground.
• No bucket or other attachment (hammer etc.) installed.
The machine’s lift capacity is restricted by the hydraulic output and the
hydraulic system’s stabilizing features.
Neither 75 % of the static tilt load nor 87 % of the hydraulic lift capacity is
exceeded.
Calculation basis: according to ISO 10567.
Setting pressure on boom hydraulic cylinder:
ET 18/20: 20000 kPa (2900 psi)
ET 24: 24000 kPa (3480 psi)
The lift capacity applies to machines under the following conditions:
• Lubricants and engine/machine fluids at the mandatory levels.
• Full fuel tank.
• Cab or canopy.
• Machine at operating temperature.
• Operator weight 75 kg (165 lbs).
To Next Page
Loading...
Need help?
General
