Wacker Neuson PT2A - Lifting and Transporting; Lifting the Machine

wc_tx004593en.fm
21
PT2A / PT3A / PT4A Lifting and Transporting
3 Lifting and Transporting
3.1 Lifting the Machine
Requirements ■ Lifting equipment (crane, hoist, or fork truck) capable of supporting the
machine’s weight
■ Lifting devices (hooks, chains, and shackles) capable of supporting the
machine’s weight
■ Engine stopped
Lifting the
machine
1. PT3 / PT4: Attach the lifting devices and equipment to the lifting eye.
PT2: Attach the lifting devices and equipment to the frame.
2. Lift the machine a small distance.
3. Check for stability. If necessary, lower the machine, reposition the lifting devices,
and lift the machine a small distance again.
4. Continue lifting the machine only when it is stable.
wc_gr014834
PT2
PT3 / PT4
WARNING
Crushing hazard. An unstable machine may cause the lifting devices and
equipment to fail. You may be crushed if the lifting devices and equipment fail.
► Check for stability before continuing.