CUSTOMIZING
Page 76
Contents
Index
ASPECT
Aspect defines the constraints of the tablet to screen relationship. ASPECT options include:
• ONE TO ONE. Sets a 1:1 scale between the tablet and
the display. Moving your tool one inch on the tablet will
move the cursor one inch on the screen. A traced image
appears the same size as the original image on your
display screen. A screen resolution of 72 DPI is used in
calculations. If your monitor is set to use a different
screen resolution, a 1:1 scale will not be maintained.
• PROPORTIONAL. Maintains correct vertical and
horizontal proportions between the tablet and display.
A traced image appears proportionally correct on your
display, but may be smaller or larger than the original
image.
• TO FIT. Correct scale or proportions are not maintained.
The selected tablet area is mapped to the selected
display area. A traced image may appear stretched, and
may be smaller or larger than the original image. This is
the default setting for all tools.
To Next Page
Loading...
Need help?
General
