Need help?Do you have a question about the Wadia 321 and is the answer not in the manual?
General| Bit Depth | Up to 24-bit |
|---|---|
| Analog Outputs | XLR, RCA |
| Output Voltage | RCA: 2.0Vrms, XLR: 4.0Vrms |
| Frequency Response | 20Hz - 20kHz |
| Digital Input Sample Rates | Up to 192kHz |
| Sample Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Weight | 15 lbs |
Step-by-step guide for installing the lithium coin cell battery into the remote.
Procedure for safely removing the battery from the remote control.
Pin configuration details for the XLR Balanced Output connectors.
Overview of the 321's default configuration options and their purpose.
Instructions on how to check the current firmware version of the device.
Instructions for turning the 321 on and off using the front panel or remote.
How to choose between different digital audio input sources for playback.
Methods for adjusting the audio output volume using the front panel or remote.
How to mute and un-mute the audio output of the 321.
Guide on how to adjust the brightness of the front panel display.
How to change the phase of the output connections for optimal audio reproduction.
Guide for connecting the 321 via USB and installing the necessary driver.
Explains the objective of installing the Wadia USB Audio Windows Driver.
Lists the essential items needed for the USB audio driver installation.
Details the physical connection of the USB cable for driver installation.
Explains key settings like Latency, Sample Rate, and ASIO Control in the driver.
Information on adjusting latency settings for optimal USB audio playback.
Guide to selecting the appropriate sample rate for USB audio input.
To Next Page
