Waeco MagicLock ML22FOX - English

Safety and installation instructions MagicLock ML22FOX
12
Contents
1 Safety and installation instructions. . . . . . . . . . . . . . . . . . . . . . . . . 12
2 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4 Fitting the central locking system. . . . . . . . . . . . . . . . . . . . . . . . . . 15
1 Safety and installation instructions
Note
WAECO will not be held liable for damage resulting from the
following:
– Installation errors
– Damage to the appliance resulting from mechanical influences
and excess voltage
– Alterations to the device without express permission from
WAECO
– Use for purposes other than those described in the operating
manual
Warning
To prevent the risk of short circuits, always disconnect the nega-
tive terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal
should also be disconnected.
Warning
Inadequate supply cable connections could result in short circuits,
which could have as a consequence that:
– cable fires occur
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
ML-22-FOX.book Seite 12 Mittwoch, 15. März 2006 3:40 15